COREAX Buying And Installation Guides

Choose hardware by the job it must do.

Start with the project, measurements, moving load, mounting structure, and required motion. These guides help you narrow drawer slides, pull-out hardware, and folding brackets before you cut panels, drill holes, or order a length that cannot fit.

Define the jobWhat moves, where is it installed, and what must stay controlled?
Measure the structureRecord usable depth, clear width, obstructions, and mounting faces.
Calculate the loadInclude the moving assembly, hardware, equipment, and contents.
Verify the productCheck the selected length and model specification before ordering.

Start here

Choose one path. Skip the rest.

A truck drawer, pantry shelf, RV fridge tray, garage tool drawer, and fold-down workbench do not ask the same questions. Find the build that matches yours, then continue into its main guide.

Heavy side-mounted drawer or trayStart with How to Choose Heavy-Duty Drawer Slides. Measure closed depth, moving weight, side clearance, lock behavior, release access, and whether the installation moves with a vehicle.

Open shelf or compact cabinet pull-outStart with Compact Cabinet Pull-Out Hardware. Confirm the clear opening, cabinet depth, hinge intrusion, shelf support, and whether the rail is truly designed to carry load from below.

Truck, overland, RV, or camper storageStart with Truck Bed Drawer System Planning, Overland Drawer System Hardware, or Hardware for RV Storage Builds. Vehicle motion changes the restraint, frame, wiring, and service-access requirements.

Fold-down shelf, table, or workbenchStart with How to Choose Folding Shelf Brackets. The wall, fasteners, shelf board, bracket spacing, shelf depth, and load position form one load path.

Choose the kind of answer

Use the resource that matches the decision.

Guides explain a complete selection or installation path. Resources define technical terms, comparisons separate two options, and direct answers resolve one narrow question.

Technical Terms

Browse COREAX resources

Understand load rating, full extension, lock-in and lock-out, side clearance, and other terms used across product and project pages.

Choose Between Options

Compare hardware types

Compare heavy-duty and undermount slides, locking and non-locking motion, mount positions, finishes, and folding versus fixed support.

Direct Answers

Resolve one hardware question

Start with a concise answer, then continue into the canonical guide when the installation needs more context.

Support Center

Find fit, order, or policy support

Use the Support Center when the next step is a Fit Check, order issue, shipping question, return, warranty request, or direct contact.

Drawer-slide essentials

Measurements and specifications that control fit.

These pages answer the decisions that should be resolved before a drawer box or tray is finalized.

Complete Pre-Order Check

How to measure for drawer slides

Build one measurement sheet covering closed depth, width, side space, load, travel path, front access, and rear obstructions.

Length

Drawer slide length vs drawer depth

Calculate the longest closed slide that fits the real rail path and use the interactive size finder before ordering.

Width

How much side clearance do drawer slides need?

Use actual rail thickness, the narrowest opening measurement, fastener-head clearance, and release space to size the drawer.

Moving Load

How to choose drawer slide load rating

Add the entire moving assembly, then verify length, orientation, drawer width, frame stiffness, and mobile-use conditions.

Position Control

Do locking slides lock open and closed?

Separate lock-in, lock-out, full extension, intermediate stops, integrated releases, and builder-supplied linkages.

Travel

What full extension actually means

Compare partial extension, full extension, over-travel, closed length, usable access, and surrounding-door clearance.

Heavy-duty and mobile storage

Choose the slide and build the surrounding system.

A strong slide cannot correct an undersized frame, inaccessible lock, or drawer that becomes out of square under load.

Start Here

How to choose heavy-duty drawer slides

Compare COREAX LD2053 and L2576 by length, published pair rating, release method, profile, mobile use, and build complexity.

Fasteners

What screws to use for heavy-duty slides

Match fastener type to plywood, solid wood, steel, aluminum, or threaded inserts while protecting the moving rail path.

Installation QA

Drawer slide installation mistakes to avoid

Use staged tightening, front-middle-rear measurements, empty and loaded cycling, and symptom-to-cause checks.

Orientation

Can drawer slides be mounted flat?

Understand why a side-mount rating usually does not transfer to a horizontal installation and when purpose-designed platform hardware is required.

Release Design

Single-side and linked releases explained

Compare an integrated single-side release with a pair of linkage-ready levers connected by a builder-supplied mechanism.

Troubleshooting

Why heavy-duty slides bind under load

Trace binding to frame spread, drawer sag, rail convergence, screw interference, concentrated front load, or incorrect orientation.

Truck, overland, RV, and camper systems

Plan for vibration, restraint, access, and service.

Vehicle storage must work while parked and remain controlled while moving. The slide is one component inside a larger system.

Truck Geometry

Truck bed drawer system planning

Map wheel wells, tailgate opening, bed depth, drawer width, frame rails, load zones, release access, and service removal.

Slide Selection

Best drawer slides for truck bed drawers

Filter by mobile-use conditions, working load, full extension, lock-in/out, side space, frame stiffness, and actual product documentation.

System Architecture

Overland drawer system hardware

Coordinate drawers, fridge or kitchen trays, dividers, tie-downs, latches, dust management, recovery access, and fold-away work surfaces.

RV Hardware Hub

Hardware for RV storage builds

Choose among locking exterior trays, compact interior pull-outs, bottom-supported shelves, separate latches, and folding table hardware.

RV Slide Selection

RV storage drawer slide guide

Separate exterior/mobile equipment trays from lighter interior cabinet drawers and choose the restraint system accordingly.

Fridge And Cooler Trays

Drawer slides for RV fridge trays

Plan concentrated appliance weight, lid swing, cable travel, ventilation, restraint, floor height, and full-extension access.

Complete Overland Build

Overland camping storage hardware

Coordinate cargo drawers, fridge access, camp-kitchen trays, fold-down work surfaces, weather exposure, and field service access.

RV Fold-Down Surface

Folding brackets for RV tables

Plan wall backing, tabletop depth, release access, folded clearance, travel vibration, and separate travel restraint.

Garage and workshop systems

Choose between drawers, trays, shelves, and fold-down work surfaces.

Garage projects should begin with the required movement, wall or cabinet structure, realistic work load, and the space needed when hardware is open and stored.

Project Overview

Garage folding workbench hardware

Start with the wall structure, worktop depth, bracket spacing, load placement, release access, and folded clearance.

Workspace Planning

Garage workbench hardware planning

Coordinate fixed storage, tool drawers, pull-out trays, folding work surfaces, wall backing, and surrounding access.

Fold-Down Workbench

Choose garage workbench brackets

Match bracket size, count, wall backing, fasteners, worktop stiffness, and realistic load placement.

Storage Architecture

Garage shelf and tray hardware

Compare fixed shelves, folding shelves, bottom-supported trays, and heavy-duty drawers by access, load, and mounting structure.

Tool Drawers

Garage tool drawer slide guide

Choose slide capacity, extension, lock behavior, side clearance, drawer stiffness, fasteners, and release access.

Compact cabinets and open pull-outs

Design the shelf and cabinet around the load path.

“Undermount” can describe different mechanisms. Confirm whether the hardware carries a conventional drawer box or a shelf supported from below.

Start Here

Compact cabinet pull-out hardware

Use a clear-opening worksheet covering face frames, hinges, plumbing, shelf thickness, appliance height, and usable depth.

Terminology

True bottom-mount vs concealed undermount

Compare bottom-supported platforms with drawer-box runners that require specific notches, locking devices, and drawer construction.

Open Shelf

Pull-out shelves without side panels

Use the go/no-go checklist for shelf stiffness, bottom support, rail alignment, racking control, and load restraint.

Installation

How to install bottom-mount slides

Sequence marking, pilot holes, loose assembly, parallel checks, staged tightening, and loaded movement testing.

Kitchen

Kitchen pull-out shelf hardware

Plan cookware, pantry goods, trash bins, appliance trays, door hinges, toe kicks, and cleanable surfaces.

Laundry And Utility

Laundry room pull-out shelf slides

Account for dense liquid containers, spills, bottle height, plumbing, cleaning access, and cabinet ventilation.

Pantry Storage

Pull-out pantry shelf slides

Plan shelf stiffness, cabinet depth, food-container loads, vertical clearance, hinge intrusion, and bottom-supported installation.

Waste Pull-Out

Trash can pull-out slides

Check bin dimensions, door and hinge clearance, loaded tray weight, cleaning access, and soft-close movement.

Appliance Tray

Appliance pull-out tray hardware

Plan equipment weight, cord movement, ventilation, shelf stiffness, usable depth, and surrounding cabinet clearance.

Bathroom Vanity

Bathroom vanity pull-out storage

Work around plumbing, bottle height, moisture, door hinges, cleaning access, and removable service zones.

Folding shelves, tables, and workbenches

Treat the wall, brackets, shelf, and load as one system.

The bracket rating alone does not establish finished shelf capacity. The weakest part of the load path controls the result.

Start Here

How to choose folding shelf brackets

Select bracket length, finish, wall structure, shelf depth, release access, spacing, and board stiffness together.

Capacity

Bracket rating vs real shelf capacity

Follow the complete load path through the shelf board, bracket arms, hinges, wall plate, fasteners, backing, and wall frame.

Count And Spacing

Folding bracket spacing guide

Use shelf length, overhang, board stiffness, load zones, and structural backing locations to choose bracket count.

Wall Structure

How to reinforce the wall

Compare direct stud fastening, wood blocking, plywood backing, masonry anchoring, and situations that need professional design.

Alignment

Install folding brackets level

Correct wall unevenness, bracket-height mismatch, fastener tension, shelf warp, and mechanisms that do not stop at the same angle.

Finish

Black vs stainless folding brackets

Choose by substrate, coating, moisture exposure, cleaning chemicals, visible wear, maintenance, and surrounding fastener compatibility.

What Is Included

Are shelf boards included?

Confirm the supplied bracket hardware, then choose the shelf material, thickness, depth, fasteners, edge treatment, and finish separately.

Before ordering

Use the guides to narrow the decision, then verify the selected product.

Guide content explains the decision process; it does not replace the exact product page, installation drawing, local building requirements, or a competent review of a safety-critical structure. Send COREAX the opening dimensions, available depth, moving weight, mounting material, product family, and intended use when the fit remains uncertain.

View COREAX Products Ask for Fit Guidance