Skip to content
Fast US delivery on stocked items Get fit guidance before you drill
COREAX

0
0

Application Guide

RV storage slide-out tray hardware.

RV storage trays, camper cabinets, galley pull-outs, and under-seat drawers need controlled movement in tight spaces. COREAX slides help builders plan pull-out access around depth, clearance, load, latch behavior, and travel vibration.

COREAX drawer slides for RV storage slide-out trays

Application fit

Use side-mount slides when an RV tray needs high load and lock control. Use bottom-mount slides when the pull-out is shelf-style, compact, or visually cleaner from the side. In both cases, confirm depth, clearance, load, and latch behavior before drilling.

What to check

Cabinet depthChoose slide length around the usable closed depth and check nearby doors, panels, and plumbing.
Travel securityVehicle movement makes lock behavior, latch planning, and full-travel testing more important than in static furniture.
Load balanceHeavy gear near the front of a tray can increase sag, binding, and stress on the mounting surface.
Ventilation clearanceFridge trays and galley modules may need space around vents, lids, cords, and service access.
Mounting structureThin RV panels often need reinforcement, backing plates, or a framed mounting surface.
Service accessPlan how the tray can be removed, adjusted, or inspected after installation.

Choose the RV path by location and movement

Exterior equipment trays and heavy fridge platforms usually need a rigid side-mounted frame, positive travel restraint, and access to the lock or latch. Interior cabinet pull-outs may be better served by a bottom-supported shelf mechanism when the load is lighter and the cabinet opening is the main constraint. A fold-down table is a separate support problem and should follow the folding-bracket path.

Start with the RV storage hardware pillar. Continue to the RV drawer slide selection guide for exterior versus interior motion, or use the fridge-tray guide when appliance weight, lid swing, cable travel, and ventilation control the design.

What commonly goes wrong

Thin panels carry the fastenersDecorative RV panels can flex or tear unless the load reaches backing or a framed mounting surface.
The tray clears while empty onlyCords, lids, doors, vents, plumbing, and cargo can enter the movement path after loading.
Soft-close is treated as travel restraintClosing feel does not replace a latch or lock suitable for vehicle movement.
Service access disappearsFinal trim or cabinetry traps rail screws, releases, wiring, or appliance connections.

Recommended COREAX path

Use COREAX heavy-duty slides for loaded RV trays and COREAX bottom-mount slides for compact shelf-style cabinet pull-outs.

View Drawer Slides

Build checklist

  • Measure the opening, inner depth, and tray width.
  • Confirm whether the tray needs side support or bottom support.
  • Check door swing, lid clearance, cords, vents, and plumbing.
  • Use reinforced mounting surfaces instead of thin unsupported panels.
  • Test movement while lightly loaded before final loading.
Continue this build

Move to the next decision.

Use the next guide in the same planning path, then verify the exact product before ordering.

01Start hereChoose the RV hardware architecture02Slide selectionChoose the drawer slide type03Appliance trayPlan a fridge or cooler tray04Matching hardwareHeavy-Duty Locking Drawer Slides
Need help confirming fit? Start a Fit Check.