Daily Use
Lift the surface when needed. Fold it flat when done.
Good for laundry folding stations, camper counters, garage worktops, and prep shelves where permanent surfaces waste space.
Click to enlarge
Fold-Down Support Brackets
Fold-Down Support Brackets300 lb per pair2 packFlat-tab release
Heavy-Duty Folding Shelf Brackets
- Heavy duty folding shelf brackets in a 2-pack with multiple size and color options.
- Reinforced triangle structure supports wall-mounted shelves, desks, and tables.
- Upgraded easy-release flat tab folds down smoothly when not in use.
- Available in black carbon steel and stainless steel finishes.
- Includes two brackets and mounting hardware for space-saving installations.
Fit Check
Rule out the wrong hardware first.
- Choose bracket length based on shelf depth.
- Mount into studs or a properly reinforced backing plate.
- Use fasteners rated for the wall material and expected load.
- For 300 lb support, do not rely on drywall alone.
Best Match
Use it for these builds.
| Load Support | Up to 300 lb per pair |
|---|---|
| Pack | 2 brackets |
| Best For | Fold-down tables, shelves, worktops |
| Finishes | Black carbon steel or stainless |
Size & Clearance
Choose your bracket size.
Use the original chart to compare bracket length, wall plate dimensions, shelf depth, and mounting clearance.
When This Bracket Makes Sense
Choose it when a surface needs to work hard, then fold away.
The conversion story is simple: confirm the wall structure, choose the bracket length for the shelf depth, and use the flat release tab when the surface needs to disappear close to the wall.
Laundry folding stationsRV counter extensionsGarage workbenchesOutdoor BBQ shelvesFold-away desks
Release Comfort
A wider tab is easier to press under the shelf.
The flat tab gives your finger more contact area, so release pressure feels less sharp than narrow latch designs.
Load Path
Strength depends on the wall, fasteners, and shelf material.
The bracket pair can support serious work surfaces when it is mounted into studs or reinforced backing, not drywall alone.
Install Check
Plan hole position, board depth, and folding clearance first.
A few minutes of layout prevents crooked brackets, pinched release access, and load paths that miss the wall structure.
Why It Works
The details that prevent buyer regret.
Reinforced triangle structureStable support for shelves, fold-down tables, and work surfaces.
Easy-release flat tabA wider tab spreads finger pressure and helps the bracket fold down more comfortably.
Two finish optionsChoose black carbon steel or stainless steel for the build environment.
Space-saving fold-down profilePop up the work surface when needed, then fold it close to the wall.
Before You Order
Questions that prevent the wrong fit.
What makes the flat tab different?
The wider tab gives your finger more surface area, so release pressure feels less sharp than a small straight latch.
Can I mount it directly to drywall?
No. For heavy loads, mount into wall studs or a properly reinforced backing plate with suitable fasteners. Drywall alone is not a load-bearing surface.
Which finish should I choose?
Black carbon steel fits garage and modern interiors. Stainless steel is better for humid, outdoor, RV, and marine-adjacent spaces.
How should I choose the bracket size?
Match bracket length to shelf depth. A deeper shelf or worktop generally needs a longer bracket and stronger wall structure.
Fit Warnings
Check these details before checkout.
The wide release tab is easier to find under the shelf and spreads finger pressure better than a narrow latch.
The 300 lb pair rating depends on studs or reinforced backing, shelf material, fasteners, and load distribution.
Fit Support
Send dimensions before you drill.
Choose bracket length based on shelf depth, wall material, expected load, and fastener type.
Need help confirming fit?
Email photos, dimensions, and your order or SKU to info@coreaxgear.com.
Open Technical SupportCustomer Reviews
Reviews from verified buyers.
0 reviews on this product.
Reviews
There are no reviews yet.