Click to enlarge
True Bottom Mount Slides
True Bottom Mount SlidesTrue bottom mountSoft close88 lb load
Black Undermount Drawer Slides
- TRUE BOTTOM-MOUNT, NO SIDE PANELS NEEDED:Unlike standard "undermount" slides that still require side cabinet walls for installation, these true bottom-mounted rails secure directly to the cabinet floor or base panel. They are the perfect solution for pull-out shelves, hidden trash can cabinets, pantry trays, and custom drawers without side panels.
- MODERN BLACK FINISH FOR VISIBLE PULL-OUTS:The sleek black coating blends into dark cabinet interiors and pairs well with matte black hardware.
- SOFT CLOSE, SMOOTH 3-SECTION GLIDE:Built-in damping helps the drawer close quietly and gently for everyday use.
- HEAVY-DUTY BOTTOM SUPPORT:Engineered for stability with up to 88 lb load capacity for pantry, under-sink, trash can and utility storage pull-outs.
- MEASURE BEFORE BUYING & EASY INSTALL:Designed for cabinets with a solid bottom or base panel; choose a slide length shorter than your cabinet inner depth.
Fit Check
Rule out the wrong hardware first.
- Confirm the drawer or tray has a solid bottom panel.
- Choose a slide length shorter than the cabinet interior depth.
- Keep left and right runners square before tightening fasteners.
- Avoid side-wall-only drawers unless the base can carry the load.
Best for these builds
No side panels requiredA practical option for shelf-style pull-outs, hidden trash-can cabinets, pantry trays, and open-base upgrades.
Soft-close 3-section glideBuilt-in damping helps drawers close quietly and smoothly under everyday cabinet loads.
Modern black finishBlends into dark cabinetry, utility drawers, and visible pull-out systems.
Bottom support structureDesigned to support from below rather than hanging from the drawer side wall.
Size & clearance
Measure before ordering.
Use the full chart for closed length, overall extended length, pull-out travel, side width, and profile height.
| Size | Actual Length | Profile Width | Profile Height |
|---|---|---|---|
| 10 in | 10.43 in | 2.56 in | 2.17 in |
| 12 in | 12.40 in | 2.56 in | 2.17 in |
| 14 in | 14.37 in | 2.56 in | 2.17 in |
| 16 in | 16.34 in | 2.56 in | 2.17 in |
| 18 in | 18.31 in | 2.56 in | 2.17 in |
| 20 in | 20.28 in | 2.56 in | 2.17 in |
- Choose a slide shorter than the cabinet inside depth.
- Designed for solid bottom panels and bottom-supported trays.
Open the original dimension diagram
Install & support
Questions that change the setup.
Is this the same as a side-mount slide?
No. It is a true bottom-mount slide for bottom-supported pull-out shelves and trays, especially where conventional side panels are absent or visible.
Will it close softly?
Yes. The slide includes damping for quieter, smoother closing under everyday cabinet loads.
Fit & selection guides
Review 5 fit checks. Use only the guides you need.
Before you drill
Keep the final setup serviceable.
Shelf-style pull-outsBest results come from a solid tray or base panel that lets the rail support the pull-out from below.
Replacement caution
Need help confirming fit?
Confirm drawer bottom structure, cabinet opening, and required slide length before drilling.
Open Technical SupportCustomer photos & videos
Recent customer reviews
See all reviewsLove a Smooth Bottom (mount)
These 18" bottom mount slides are great when a side mount is not convenient. They mount solely to the underside of the drawer and the top of the frame. They will be nearly invisible on the open drawer except possibly for the plastic end bumper if mounted flush to the front of the drawer.I have not tested the 88 pound capacity yet, but unweighted they are very smooth with a nice solid soft close mechanism. It should be noted as per the vendor, that they should not be mounted near the floor where underside access is limited. Despite this 'requirement', I do think they could be mounted low if the drawer is mounted first, then the slides mounted to the floor. But again, not recommended by the manufacturer.It is interesting that the slides are marked with a 'L' and 'R' which is the opposite of what all their pictures show the mounting orientation. This had me confused for some time, but in the end I doubt it really matters which way you mount them so long as the white tips mounted to the underside of the drawer face the front.Except for the lack of instructions and the confusing orientation, these slides function very smoothly and seem to be a good quality product at a very reasonable price.
Reviewed configuration: Size: 18 Inch
Heavy duty. Soft close. Easy to install.
These are high quality slides. I needed to create a shelf for my island that will slide out when I pull it, so these slides fit the bill. They are soft close and heavy duty. I am very pleased with them and can now more easily store and retrieve my kitchen items.
Reviewed configuration: Size: 12 Inch
This is a nice set of undermount drawer slides
This is a nice set of undermount drawer slides. They have quite a lot of extension distance and have easy to locate mounting holes. I like that all you need is a bottom surface to mount to and no side are required on these. The soft close mechanism works smoothly and the slides glide back and forth freely.
Reviewed configuration: Size: 20 Inch
Good undermount drawer slides with soft closure
Good and easy to install undermount drawer slides. Soft closure is perfect for every day or heavy use without the noise
Reviewed configuration: Size: 14 Inch
Sturdy, well made.
Strong sturdy slides. Used to install a pull-out base for a kitchen top oven/air fryer. Does not sag when extended.
Write a verified-owner review
Sign in to confirm your COREAX purchase before submitting a review.
Sign in to write a review