Black Undermount Drawer Slides

These 18" bottom mount slides are great when a side mount is not convenient. They mount solely to the underside of the drawer and the top of the frame. They will be nearly invisible on the open drawer except possibly for the plastic end bumper if mounted flush to the front of the drawer.I have not tested the 88 pound capacity yet, but unweighted they are very smooth with a nice solid soft close mechanism. It should be noted as per the vendor, that they should not be mounted near the floor where underside access is limited. Despite this 'requirement', I do think they could be mounted low if the drawer is mounted first, then the slides mounted to the floor. But again, not recommended by the manufacturer.It is interesting that the slides are marked with a 'L' and 'R' which is the opposite of what all their pictures show the mounting orientation. This had me confused for some time, but in the end I doubt it really matters which way you mount them so long as the white tips mounted to the underside of the drawer face the front.Except for the lack of instructions and the confusing orientation, these slides function very smoothly and seem to be a good quality product at a very reasonable price.

These are high quality slides. I needed to create a shelf for my island that will slide out when I pull it, so these slides fit the bill. They are soft close and heavy duty. I am very pleased with them and can now more easily store and retrieve my kitchen items.

This is a nice set of undermount drawer slides. They have quite a lot of extension distance and have easy to locate mounting holes. I like that all you need is a bottom surface to mount to and no side are required on these. The soft close mechanism works smoothly and the slides glide back and forth freely.

Good and easy to install undermount drawer slides. Soft closure is perfect for every day or heavy use without the noise

Strong sturdy slides. Used to install a pull-out base for a kitchen top oven/air fryer. Does not sag when extended.

These undermount slides are a solid option if you want a cleaner, more concealed look for drawers or pull-out shelves. Once installed, the hardware is completely out of sight, which really improves the overall finish of the project. The motion is smooth and the soft-close feature works well. Even with a decent amount of weight, the drawer closes gently without slamming, and the full extension makes it easy to access everything inside. They feel sturdy and well made, with good stability once aligned properly. Installation takes some care to get everything level, but that’s expected for this type of hardware. Overall, it's a great choice and a better value for anyone building or upgrading cabinets where appearance and smooth function both matter.

I used these to add a sliding shelf to a hard to reach cabinet and it made a big difference. Being able to pull everything out instead of digging around in the back is a huge improvement.

Installation was pretty straightforward. Once everything was lined up, they went in without much hassle and adjusted easily.

They feel fairly solid once installed and slide smoothly with a nice soft close action. Not heavy-duty commercial hardware, but for typical cabinet use they seem plenty strong and do exactly what I needed.

I’m impressed with these undermount drawer slides. The metal feels solid and well‑made, not flimsy or thin like some of the cheaper options out there.

Once installed, the drawer glides smoothly and feels secure, with no wobble or sag.

My only real complaint is the lack of instructions. If you’ve installed slides before, you’ll figure it out, but if you’re new to this type of hardware (like me), you may find yourself doing a little trial and error or checking the listing photos for clues. A simple one‑page guide would’ve made the process much easier.

That said, once everything was in place, the slides worked beautifully. Good value, great sturdiness, and a clean look. I’d buy them again.

I bought these to replace drawer slides in our existing cabinet. They are very heavy and should work very well. High priced but better than what we have. Didn't come with instructions.

I ordered the 7.8" version of these drawer slides for a specific purpose. Despite my efforts, I misread how these attach, they are meant to sit on the bottom of the cabinet box and allow a pull-out shelf. I thought I could mount them on the underside of a countertop/table and pull out a shelf. However, by constructing a spacer block, I feel I should still be able to use these slides.

These slides appear to be of high quality with a soft close feature that actuates smoothly. The resistance to pulling out the slide is a little more than I anticipated, but it shouldn't be a big deal for my purposes. All in all, a nice piece of a kit with a specific design intent, but can be modified to accommodate other needs.