Skip to content
Fast US delivery on stocked items Get fit guidance before you drill
COREAX

0
0

76 mm wide bodyFull extensionDIY linkage ready

76mm Heavy-Duty Locking Drawer Slides

No reviews yet
SKU CX-L2576
76mm Heavy-Duty Locking Drawer SlidesL2576 Heavy-Duty Slides
  • HEAVY-DUTY 76 MM STEEL BODYWide-profile cold-rolled steel slides, dense ball bearings, and full-extension travel support demanding RV, truck, van, toolbox, fridge, battery, generator, and equipment pull-outs.
  • CUSTOMIZABLE L-SHAPED LOCK LEVERThe extended lever surface is designed for builders who want to add their own linkage bar, pull rod, or cable for a one-hand release setup.
  • DIY LINKAGE-READY DESIGNAn inward-facing linkage hole works with common fabrication materials such as flat steel, round bar, aluminum tube, or wood. Linkage components are not included.
  • LOCKS CLOSED AND FULLY EXTENDEDLock-in helps control the drawer during travel, while lock-out keeps the platform extended during loading, service, or work.
  • BUILT FOR CUSTOM HEAVY-DUTY PROJECTSChoose the correct length and verify the loaded structure, parallel alignment, fasteners, and weight distribution before final use.
Customizable L-shaped leverA pre-drilled inward-facing hole provides a practical connection point for a custom release linkage.
Lock-in and lock-out controlThe slides lock closed for travel and lock fully extended for loading or service access.
Wide 76 mm steel bodyThe large profile and ball-bearing structure are intended for demanding vehicle and equipment pull-outs.
Flexible builder linkageUse a suitable flat bar, round bar, aluminum tube, cable, or other fabricated connection; linkage parts are not included.

From the Brand

Choose it for large pull-outs that need heavy structure and a builder-defined release.

The slide can be used with its two standard lock levers or connected with a custom flat bar, round bar, tube, cable, or other linkage. The linkage itself is not included.

  • RV storage drawers
  • Van storage systems
  • Truck bed drawers
  • Fridge and equipment trays
  • Mobile toolboxes

Release Design

Start with a linkage-ready lever.

The inward-facing hole gives fabricators a defined connection point without supplying a one-size-fits-all linkage bar.

Build Choice

Use standard release or link both sides.

Operate the two levers normally, or fabricate a linkage that matches the width, access, and structure of the finished pull-out.

Travel Control

Locks closed and locks fully extended.

Lock-in helps prevent unwanted opening in motion; lock-out keeps the platform extended during loading and service.

Applications

Built for large mobile and utility storage.

RV storage, van systems, truck drawers, fridge trays, toolboxes, and equipment platforms are the intended project class.

Product information

Length changes the published load rating.

Select by closed length and travel first, then check the pair rating and the 76 mm by 19 mm mounting profile.

Before ordering
  • Confirm closed length, full travel path, and the changing load rating for the selected size.
  • Allow approximately 0.75 inch side clearance per rail and keep both mounting faces parallel.
  • Leave access around the L-shaped lock lever and any custom linkage connection.
  • Test lock-in, lock-out, fasteners, frame stiffness, and real load gradually before service.

Install & support

Questions that change the setup.

Is the one-hand linkage included?

No. The L-shaped levers are linkage-ready, but the connection itself is builder-supplied so you can size it to your own drawer width and handle position.

See DIY linkage options and build steps
Is every length rated for 500 lb?

No. Load rating varies by length. Use the size table for the listed pair rating and account for mounting orientation, frame stiffness, fasteners, and load distribution.

Fit & selection guides

Review 5 fit checks. Use only the guides you need.

  1. 01Calculate the moving load
  2. 02Choose the correct length
  3. 03Measure side clearance
  4. 04Plan the linked release
  5. 05Build the one-hand linkage

Before you drill

Keep the final setup serviceable.

Custom linkageTreat the linkage as part of the safety-critical mechanism. Confirm equal release travel on both sides and test it repeatedly before loading the pull-out.
Published load ratingsThe pair rating decreases as slide length increases and still depends on rigid parallel mounting, suitable fasteners, and controlled load distribution.
Need help confirming fit?

Send closed depth, pull-out width, loaded weight, mounting orientation, and linkage plan if you want help checking fit.

Open Technical Support

Customer Reviews

No reviews yet.

Already using this product? Write a review.

Write a review